CUTOUT, POLE LINE HARDWARE MANUFACTURER

Fasteners >>

Machine Bolts Double Arming Bolts Carriage Bolts Forged Oval Eyebolts Forged Thimbleye Bolts Spool Bolts

Washers >>

Square & Curved Washer Round Washers

Eyenuts >>

Forged/ Thimble eyenuts

Eyelets >>

Forged/ Standard eyelet Forged/ Straight eyelet Forged/ Angle eyelet

Pins >>

Low Voltage Forged Steel Pins High Voltage Forged Steel Pins Pole Top Pins

Clamps & Braces >>

Guy Clamps Attachments Cable Suspension Clamps Bronze Clamp Crossarm Braces Anchor Shackle

Clevises >>

Insulated Secondary & Deadend Clevises Insulated Crossarm Clevises Insulated SwingingClevises

Racks >>

Secondary Racks

Mounting Brackets >>

Cutout Mounting Brackets

Screws & Nuts >>

Lag Screws Drive Hooks MF Type Lock Nuts Square Nuts

Animal Guard >>

Silicone Animal Guard

Gr & Anchor Rods >>

Anchor Rods Copper Rods Galvanized Rods

Porcelain Insulators >>

Suspension Insulators Spool Insulators Strain Insulators Low Voltage Pin Type Insulators High Voltage Pin Type Insulators Line Post Insulators Station Post Insulators Suspensions

Silicone and Porcelain Cutouts >>

Cutouts

Power Line Hardware Cutouts offering 15 KV and 27 KV Silicone & Porcelain Cutouts

Outdoor Distribution Fuse Cutouts
Construction & Design Profile – 15 KV, Type PLH

Parallel Groove Connectors
-Tin plated red brass for excellent productivity conductivity and case of conductor connection. Provides for the use No. 6 solid through No. 2 standard copper or aluminium in one grove No. 2 solid through 250 kc mil standard copper or aluminium, or 4.0 ACSR in the groove.

Stainless Steel Sleet Shield
-Stainless steel shield offers premium protection of the current path and tension spring.

Silver to Silver Contract
-Silver plated copper current path provides corrosion protection for sure contact with silver plated fuse cap.

Galvanized Loadbuster Hooks
-High strength galvanized hooks diverted to their support to offer higher strength than welded assembles.

Press fit Upper Ferrule
-A press fit upper ferrule insures a tight seal that has been proven to prevent the escape of exhaust gases from the top of the fuse unit.

High Burst Strength Fuse Tube
-Vulcanized fibre tubing over wrapped with filament epoxy offers are quenching characteristics while providing critical burst strength. Painted with special UV resistant finish.

Aluminium Bronze Hinge and Trunnion
-Aluminium bronze casting offer excellent mechanical strength and superior conductivity, silver plated contacts protect against corrosion that can interfere with contact.

NEMA Brackets
-Galvanized steel hardware available as NEMA standard or extended NEMA brackets.

Bird Proof Ceramic Body
-100% of ceramic bodies are mechanically tested for strength.

Silver Plated Lower Contacts
-Silver plated high conductivity copper contacts prevent corrosion and insures excellent contacts.

Stainless Steel Flipper
-Prevents corrosion of fuse lead wire and helps in lead ejection on low current faults.

14.4 KV Nominal, 15 KV maximum
95 KV BIL, 100 continuous Amps

16000 Amps, Interrupting rms asymmetrical
8-1/2” Minimum leakage Distance to Ground

Print Specification

Cutout (PDF, 1.3MB)